IPS8.8
The IPS8.8 is ARC Audio's first
complete and yet optional integrated solution for today’s new ARC
Series amplifiers. Introduced as a plug and play drop-in DSP solution
for ARC Audio’s ARC Series amplifiers the IPS8.8 replaces the front end,
input board, with just the removal of a few screws and connection
cables and gives users the power of the new Pro-Series DSP technology
developed exclusively for ARC Audio.
Specifications
Processor Type Front end amp module (ARC Series amps only)
Compatible With- ARC 1000.2, ARC 1000.4, ARC 1000.6 ONLY
Processor Resolution Fixed Point Native 32-Bits
Sample Rate 96kHz/192kHz
Analog Inputs 8 ch. Differential in (RCA or Speaker Level)
Input Sensitivity .5V - 32V RMS
Digital Inputs TOSLink
Auto-sense Turn-On Yes, Signal & DC (BTL) (Uses Ch 1/2 Inputs Only)
Outputs (RCA) N/A
Outputs Voltage (RCA) N/A
Input Impedance (rca) 10k ohms
Frequency Response 2Hz - 23.5kHz
S/N Ratio 1V 1:1 107.1dBdB
S/N 4V 1:1 108.dBdB
Operating Voltage 6V - 17.0V (Start Stop Compliance to 4.5V)
Output Equalization 248 Bands 1/3rd Octave (linkable) -or- 248 Bands variable Parametric EQ
Output Equalization Resolution 1/10th dB per step +20dB / -24dB
Output Signal Delay Up to 30ms per channel in .01ms increments (Fixed Point Delay)
Input Signal Mixer Yes - 10-Channels In (Including Digital) x 10-Channels Out (Including Up-Mixer Out)
Advanced Mixer (Output Signal Mixer) Yes, When Selected
Easy-to-use Mixer Assistant Yes, Exclusive to the PS8-Pro, PS8-50 and IPS8.8
Crossovers Phase Correct AP/HP/LP/BP all channels
Crossover Slopes 6dB, 12dB, 18dB, 24dB, 30dB, 36dB, 42dB, 48dB Slopes all bands all channels
Crossover Types Butterworth, Linkwitz-Riley, Bessel, Variable Q, Chebyshev (all channels all bands)
Crossover selectable frequencies 10Hz - 20kHz in .01 Hz increments)
Output Signal up mixer Yes
Input Signal Equalization 12 Bands Parametric (linkable) Per Channel
Input Equalization Resolution 1/10th dB per step +20dB / -24dB
Input Equalization All Pass Filters Yes - Individual per input EQ band
Input Signal Delay Yes - Up to 11.04ms per channel input
Presets Up to 4-Presets
Hi-Res Bluetooth (Streaming Audio) Yes - Requires ARC BTM & BDM (Both Required) (Sold Separately)
External Remote Level Control Yes (ARC PSC or LR1) (Sold as an accessory, not included)
AXP WiFi control adapter card Exclusive to the Pro Series DSP's (Sold Separately)
Preset selection without controller use Yes - Optional manual trigger switches +/- for up to 4 presets (Not Included)
Remote Turn-On Output Controls Turn on Output (up to 40ms), Turn-on Hold (up to 40ms), Auto-sense hold time (up to 200ms)
Remote Turn-On Output On/Off lead timing control Remote on/off adjustable up to 40ms each
Maestro AR Module interface capable Yes - Requires Maestro T-Harness and data cable for connection
Expansion Capability (8-CH, 16-CH, 24-CH PS8-Pro can be ran in multiples with individual USB connections to a single PC with single operating software being used
Software Interface Windows PC Required (Windows 8 & Windows 10)
Windows OS Notice Note that the Pro-Series software is
ONLY recommended for use with authentic licensed versions of the Windows
Operating system. Use of counterfeit, cracked or hacked versions are
not guaranteed to work and can cause unwanted and/or undesired results
while using any ARC branded DSP or ANY DSP on the market. Use of
anything other than an authentic licensed version of Windows will void
ALL warranty and support of ARC Audio DSP products and its user
interface
_____________________________________________________________________________________________________________________________
